Connecting Your Laptop Wirelessly:

1. Connect your laptop.
   • On Windows: 
     1. Use the Windows Key + K Key to bring up the Project menu.
     2. Choose Connect to a wireless display. 
     3. Choose the Cynap for your room. 
   • On MacBook: 
     1. Select the Screen Mirroring icon in your menu bar to see available devices. 
     2. Select the Cynap for your room. 
2. Enter the 4-digit code that appears at the top of the Cynap screen on your laptop. Your laptop will appear on the Cynap screen. 

Use these steps to display a device that is hooked up using an HDMI or USB-C cable; this includes the document camera or a laptop.

Option 1. Control Panels: If your classroom has a control panel where you choose HDMI, USB-C, or Blu-Ray player follow these instructions: On the Control Panel under the Cynap Input menu, select the device you want to display from the Cynap onto the projector. You can select from your document camera, laptop connected with HDMI or USB-C, or Blu-ray player. Note: Your control panel may look different than the image on the right. ——————————————————————— Option 2: Wall Touchscreen Only: If your classroom has a touchscreen monitor and the control panel does not specify connection type, connect your laptop and skip to step 2.
2. On the Cynap screen, tap the screen and select the [ + ] button.
3. On the Cynap screen, tap the screen and select the [ + ] button.
4. Then, select Cynap Input to add the device previously selected on the Control panel. This icon may be labeled slightly differently, such as Input or HDMI (even if you are connected another way such as USB-C).
5. Your selected device will appear on the Cynap screen.
6. Note: If you are recording using Zoom or Panopto, you will need to tap your laptop or other screen you wish to share full screen with the class to make it larger after tapping the share screen button in Panopto/Zoom.