Skip to content Skip to main navigation Report an accessibility issue
Tickle Room 405

Tickle Engineering 405

Updated Summer 2021

Your Room Contains

  • 3 Ceiling Projector(s)
  • 1 Podium Monitor(s)
  • Control Panel: Style 3
  • Cynap
  • Classroom Supplied Computer
  • Document Camera
  • Camera
  • 2 Lapel Microphone(s)
  • Blu-ray
  • This room has a departmental Windows PC listed as "Room Computer" on the Control Panel

How To...

These instructions will help you to record your lecture using Panopto and Cynap in your classroom.

Step 1: Display Cynap to the Projector

Learn how to display Cynap on the projector. (This link will open in a new tab)

Step 2: Share Your Device

Share the device(s) you want to record. (This link will open in a new tab)

Note: you can share your laptop either wired or wirelessly on Cynap.

Step 3: Tap the Cynap screen and select [+] button

Step 4: Choose WebRTC

Step 5: Choose the Panopto icon

Step 6: Login to Panopto Canvas

Use your NetID and Password

Step 7: Choose the green Create button

Note: Don’t see the green create button when you log onto Panopto on the Cynap?  Enable creator access to Panopto in Canvas.

Step 8: Choose Panopto Capture: Record in Browser

Step 9: Choose Sources by tapping the Screens and Apps button at the top of the Panopto page.

Note, to change to a different source, such as document camera or laptop, tap the WebRTC menu at the bottom of the screen.

  • Select the screen share icon.
  • Change to a different source.

Step 10: To record, tap the red Record button.

Step 11: To end the recording, tap the red Stop button.

Step 12: Saving Your Recording

Recordings and Settings are automatically saved, however, you have the option to:

  • Enter the name you wish to call your recording on the pop-up window.
  • Choose the folder where you wish to save the recording.
  • WAIT to close out the window until you see the green bar message in the upper left corner that says it is safe to close your browser window.

Printable PDF Instructions

Recording Your Lecture with Panopto (PDF)


These instructions will help you to hold a Zoom meeting or record your lecture using Zoom and Cynap in your classroom.

Step 1: Display Cynap on the Projector

Learn how to display Cynap on the projector. (This link will open in a new tab)

Step 2: Share Your Device

Share the device(s) you want to record. (This link will open in a new tab)

Note: you can share your laptop either wired or wirelessly on Cynap.

Step 3: Tap the Cynap screen and select [+] button

Step 4: Choose WebRTC

Step 5: Choose the Zoom Icon

Step 6: On the Zoom page, choose Create or Edit account to login with your NetID and Password

Note, you will need to authenticate using Two-Factor authentication.

Create or Edit Account allows you to start a recurring meeting.

Step 7: Start your meeting

Select the recurring meeting you wish to start and choose start.

Possible Step 8: Choose Join from your web browser

Some classrooms have a newer firmware on Cynap that skips this step. If you have a newer firmware in your classroom, you will go directly to Step 11. Otherwise, notice, the text is at the bottom of the page below the blue button prompt for launch meeting.

Possible Step 9: Choose Allow or Block

Some classrooms have a newer firmware on Cynap that skips this step. If you have a newer firmware in your classroom, you will go directly to Step 11. Otherwise, choose either Allow or Block for notifications. It does not matter which you choose. Cynap does not cache information.

Possible Step 10: Select Join Audio by Your Computer

Some classrooms have a newer firmware on Cynap that skips this step. If you have a newer firmware in your classroom, you will go directly to Step 11. Otherwise, to be heard on your Zoom recording, choose Join Audio by Computer and use the lapel mic.

Step 11: Share Screen

Remember to use the lapel mic in order to be heard on your recording or in your meeting.

On the WebRTC window, choose the Share Screen icon at the bottom of the Zoom window.

Step 12: Select which open window you wish to share.

Note, this would be your laptop connected with HDMI or VGA or document camera chosen as Cynap Input or a wirelessly connected laptop, phone, or tablet.

Step 13: Record Your Presentation

Select the record button on the WebRTC window to record your Zoom presentation. Presentations are automatically recorded to the cloud and recordings will be copied over to Panopto for you.

Note, in some rooms, the room camera turns off when sharing the screen. To turn the camera back on, select Start Video again.

Printable PDF Instructions

Recording Your Lecture with Zoom (PDF)


Printable PDF Instructions

Getting Started With...

Display on Screens:

  1. Tap Turn System On.
  2. Tap the button for how you wish to display the screens. 
    • All Screens Same Image - will put the same image on all screens.
    • Choosing Screen 1, Screen 2, or Screen 3 individually will allow you to put a different image on each screen.
    • In some classrooms, you can choose to turn off individual screens; tap the Screen Controls button to choose which screen(s) to turn off, if available in your classroom.
  3. Under the screen choice you picked, choose the device you wish to display on the screen such as a laptop connected to an HDMI 1 or VGA 1 cable, the Blu-ray player, Doc Cam, or Cynap.
  4. If choosing different images on each screen, ensure you choose Room Audio to choose which screen's audio will be heard in the room.
  5. The Blank Screen option will stop the currently selected image from projecting on that screen.

When Finished

  1. Tap Home.
  2. Choose Turn System Off.
Step 1
Step 2


These instructions will help you to connect a device to the Cynap.

Go to our Cynap page in the Technology Training section for more advanced features of using Cynap.

Connecting Your Laptop Wirelessly:

  1. Connect your laptop.
    • On Windows: 
      1. Use the Windows Key + P Key to bring up the Project menu.
      2. Choose Connect to a wireless display
      3. Choose the Cynap for your room. 
    • On MacBook: 
      1. Select the Airplay icon in your menu bar to see available devices. 
      2. Select the Cynap for your room. 
  2. Enter the 4-digit code that appears at the top of the Cynap screen on your laptop. Your laptop will appear on the Cynap screen. 

Connecting a Wired Device:

Use these steps to display a device that is hooked up using an HDMI cable; this includes the document camera or a laptop.

1. On the Control Panel under the Cynap Input menu, select the device you want to display from the Cynap onto the projector. You can select from your document camera, laptop connected with HDMI or VGA, or Blu-ray player.
Note: Your control panel may look different than the image on the right.
This image has an empty alt attribute; its file name is MicrosoftTeams-image-1.jpg
2. On the Cynap screen, tap the screen and select the [ + ] button.
3. Then, select Cynap Input to add the device previously selected on the Control panel. 
4. Your selected device will appear on the Cynap screen. If you are not in mirror mode, where the instructor screen is mirrored on the main screen. You can send the image over to the main projector screen by tapping the bottom menu of the window on the Cynap and choosing the Send to Projector button.


Some rooms on campus have supplied computers in the classroom. These are usually Windows computers that can be used for PowerPoint, clickers, and other apps. These computers are provided by the department. They may or may not be in Active Directory.

Using the Camera and Supplied Computer

Use the Classroom Supplied Computer to run a Zoom meeting using the in room microphone and camera.

  1. Log onto the computer using your NetID and Password (or the computer may already be logged in for you with a local account).
  2. Launch Zoom
  3. Choose Sign in
  4. Select the Sign in with SSO option on the right.
  5. Type in Tennessee before the .zoom.us
  6. Select Continue
  7. Log in to Zoom with your NetID and Password
  8. Approve the Two-Factor Authentication
  9. Choose Launch Zoom
  10. Choose Yes if asked Did you mean to switch apps?
  11. Launch your meeting
  12. Choose Join with Computer Audio (you may want to select the checkbox to Automatically join audio by computer when joining a meeting as well)
  13. Turn on the lavalier (lapel-style) mic.
  14. If needed, in Zoom select the menu next to the Sound to choose the correct sound for the room.
  15. Choose Same as System for both the microphone and the speaker.
  16. Make sure you LOG OUT of Zoom when you leave - especially if you are on a department computer that does not use an Active Directory login. Otherwise, you will remain logged into Zoom (or any other app you use) and anyone using the computer can use your login.

For information on connecting your document camera to your classroom PC, see this article.


The document camera located in your classroom allows you to easily display documents, objects, and simple demonstrations to an entire classroom and/or lecture hall.  

Key Features:

  • Zoom wheel, which allows for closer details of the images or objects being projected
  • Continuous auto-focus that adjusts as you zoom in and out to keep your image in clear focus
  • LCD preview
  • A brightly lit working surface
  • Loop-pull up for easy setup
  • Freeze frame, which freezes the image displayed through the projector system

How to Use the Document Camera:

  • Lift up the document camera with the loop-pull and the camera will automatically turn on.  
  • Place your document or demonstration on the working surface 
  • Ensure auto-focus is enabled to have a continuous clear presentation  

Other Resources:


The camera in your classroom can be controlled by the Control Panel in your room. You should see a Camera control button on the panel. This is usually under the Cynap menu. On this button, you can pan, tilt, and zoom in with your camera. In some classrooms, cameras may have preset controls that will move them to a set spot and zoom. Try out the controls available to you in your room.

Tip: if you are zoomed in, the pan and tilt will be more pronounced. Zoom out to have more control over the movement of the camera.

These cameras are set up to use with Zoom or Panopto, which you can access through the WebRTC app on your Cynap.


The Blu-ray player is located inside the instructor podium and the basic controls area available on the control panel.

The Blu-ray player can play Blu-rays, standard DVDs and Music CDs coded for Region 1 - Canada, the United States and U.S. territories.

Getting Started

  1. Begin by using the control panel to turn the projection system on. If your classroom has multiple projectors, there will be more than one projection option at the top of the control panel.
  2. To enable the Blu-ray player, select which projector you wish to display the Blu-ray/DVD through and select DVD Player option.  
  3. Load your Blu-ray/DVD into the player.
  4. Use the control panel to access the menu controls and select what you'd like to play.

See this example for how the DVD controls will look on your control panel. Notice you can play, stop, pause, rewind, fast-forward and step ahead. You also have a subtitles on/off option. Use the circular menu for moving through the on-screen menu on your DVD.

DVD menu controls