Please note: The Zeanah classrooms were installed by the contractor. The control panels do not match control panels in other buildings on campus.

These instructions are for using the Cynap in the combined classroom. These instructions are for the following areas:

• ZEC 170, 171, 177, 178 (Combined)
• ZEC 270, 271, 277, 278 (Combined)
• ZEC 370, 371, 377, 378 (Combined)

1. Tap the University of Tennessee screen to turn the system on.
2. Under Walls, Turn on All projectors.
3. Choose Manual. You may choose which projectors you wish to use.
4. Choose Enable Master Mode. (You will see a message pop up that says: “Enabling Master Mode. Please Wait..”
5. Tap the interactive instructor screen to control the Cynap.
6. Each of the four rooms contains a Cynap and a Cynap core. The name of the Cynap is in the top left of each of the screens.
7. When finished, return to the main Presentation screen and choose Power.