Skip to content Skip to main navigation Report an accessibility issue
Haslam Music Center 10. Room includes tables and chairs in a conference room style.

Haslam Music 10

Room Technology Updated: Summer 2021

Max Capacity: 15

Your Room Contains

Classroom Resources:
Instructor Resources:
  • Control Panel: Wall Style 6
  • 1 Cynap Core Pro(s)
  • Blu-ray
  • Cables:
    • 1 HDMI cable(s)
    • 1 VGA Cable(s)
Instructor Screens:
Audience Screens:
  • 1 Wall Monitor(s)
  • 1 Interactive Whiteboard(s)
Audio Visual:
  • 1 Lapel Microphone(s)
  • 1 Conference Microphone(s)
Note: ViewSonic Interactive Board and Cameras

How To...

control panel icon

Display an Image on the Screen

  1. Tap Turn System On.
  2. Select Screen.
  3. Plug in your laptop using the HDMI cable.
  4. Choose Wall Plate to display your laptop to the screen.
  5. Choose Cynap to add your laptop to Cynap and also use Zoom or Panopto.
    1. To add laptop to Cynap, on the Cynap, tap the + button.
    2. From the Cynap + menu, choose Cynap Input to display the laptop.
Steps 1
Step 2

When Finished

  1. Press the Home button.
  2. Choose Turn System Off.

The Cynap Core Pro can have a wireless device attached to it. It is not set up for recording in Zoom, Panopto, or Teams. You can not connect via cables such as USB-C or HDMI to this device.

See this page for detailed instructions on connection to Cynap wirelessly on Mac or Windows.

Connecting Your Laptop Wirelessly:

  1. Connect your laptop.
    • On Windows: 
      1. Use the Windows Key + K Key to bring up the Project menu.
      2. Choose Connect to a wireless display. 
      3. Choose the Cynap for your room. 
    • On MacBook: 
      1. Select the Screen Mirroring icon in your menu bar to see available devices. 
      2. Select the Cynap for your room. 
  2. Enter the 4-digit code that appears at the top of the Cynap screen on your laptop. Your laptop will appear on the Cynap screen. 

The Blu-ray player is located inside the instructor podium and the basic controls area available on the control panel.

The Blu-ray player can play Blu-rays, standard DVDs and Music CDs coded for Region 1 - Canada, the United States and U.S. territories.

Getting Started

  1. Begin by using the control panel to turn the projection system on. If your classroom has multiple projectors, there will be more than one projection option at the top of the control panel.
  2. To enable the Blu-ray player, select which projector you wish to display the Blu-ray/DVD through and select DVD Player option.  
  3. Load your Blu-ray/DVD into the player.
  4. Use the control panel to access the menu controls and select Enter to play a Blu-ray or DVD.

See this example for how the DVD controls will look on your control panel. Notice you can play, stop, pause, rewind, fast-forward and step ahead. You also have a subtitles on/off option. Use the circular menu for moving through the on-screen menu on your DVD.

DVD menu controls

Lapel-style microphones are called Lavalier mics. Lavalier microphones are clipped to your shirt about 3-6 inches below your chin and come with a battery pack you can clip to a belt or slide in a pocket.

Tip: Adjust sound levels by going to the tab for in-room mics or microphones on the control panel. You can adjust the sound level for when you use Zoom or Panopto by going to the tab for Zoom/Panopto mic.

Each mic has been programmed to work with the audio system in your classroom. These mics will not work in other rooms because they have not been set to work with another room system and may also be incompatible with some of the equipment in that room. Please contact OIT if you need additional mics in your classroom.

Tip: when you switch the battery pack on, if the light is green, the battery charge is good. If the light is red, the battery is getting low.

To change the battery on this microphone, look for the small tab either on the side or bottom of the battery pack. Mics will take either D or AA batteries. These batteries should be available in the cable drawer of your podium. If you do not have batteries and need some immediately, contact the emergency line of the OIT HelpDesk at 865-974-9110. If you wish to just report that the room needs batteries for next time, please contact the main number of the OIT HelpDesk at 865-974-9900.


conference microphone system

These conference-style systems are in classrooms to enable discussions during Zoom meetings or to allow audience comments to be recorded when using Panopto.

Tip: When muted, this microphone has a series of red lights around the top. Tap the mute/unmute button on the conference mic to unmute. When unmuted, it will have a green light on top.

  • Participants can be as many as 10-20 feet away from the system and still be heard clearly. Softer spoken individuals should be closer to the system. Louder individuals may be picked up as far away as 20 feet.
  • These systems do not amplify sound into the classroom.

There are 2 cameras in this room. The monitor is a ViewSonic Interactive Board with whiteboard capabilities. See instructions for ViewSonic Board here.