Skip to content Skip to main navigation Report an accessibility issue
Claxton Education Building Room 210 with tables in square with chairs in square around tables

Claxton 210

Room Technology Updated: Summer 2024

Max Capacity: 15

Your Room Contains

Classroom Resources:
Instructor Resources:
  • Control Panel: Wall Style 8
  • Cynap
  • Cables:
    •  HDMI cable(s)
Instructor Screens:
Audience Screens:
  • 1 Wall Monitor(s)
Audio Visual:
  • 1 Conference Microphone(s)

How To...

Display an Image on the Screen

  1. Tap Turn System On.
  2. Connect wirelessly to the cynap using Airplay (Mac Computer) or Miracast (Windows computer).
  3. Select Camera Controls
  4. On the Camera Controls menu use the buttons to navigate to the ideal camera preferences.

When Finished

  1. Press the Home button.
  2. Choose Turn System Off.
control panel no audio
Steps 1
wall style 8 cynap core
Steps 2
Wall style 8 with control buttons
Steps 4

These instructions will help you to connect a device to the Cynap.

Go to our Cynap page in the Technology Training section for more advanced features of using Cynap.

Connecting Your Laptop Wirelessly:

  1. Connect your laptop.
    • On Windows: 
      1. Use the Windows Key + K Key to bring up the Project menu.
      2. Choose Connect to a wireless display. 
      3. Choose the Cynap for your room. 
    • On MacBook: 
      1. Select the Airplay icon in your menu bar to see available devices. 
      2. Select the Cynap for your room. 
  2. Enter the 4-digit code that appears at the top of the Cynap screen on your laptop. Your laptop will appear on the Cynap screen. 

Connecting a Wired Device:

Use these steps to display a device that is hooked up using an HDMI cable; this includes the document camera or a laptop.

1. On the Control Panel under the Cynap Input menu, select the device you want to display from the Cynap onto the projector. You can select from your document camera, laptop connected with HDMI or VGA, or Blu-ray player.
Note: Your control panel may look different than the image on the right.		This image has an empty alt attribute; its file name is MicrosoftTeams-image-1.jpg
2. On the Cynap screen, tap the screen and select the [ + ] button.
3. Then, select Cynap Input to add the device previously selected on the Control panel. 
4. Your selected device will appear on the Cynap screen. If you are not in mirror mode, where the instructor screen is mirrored on the main screen, you can send the image over to the main projector screen by tapping the bottom menu of the window on the Cynap and choosing the Send to Projector button.
Note: OIT recommends using Mirror mode to make things simpler. If you use Mirror mode, make sure you go to your home screen on the control panel and turn the system off, then turn the system back on at the beginning of class. This will reset your PIN code for Cynap so that previous users will not have the PIN code.


conference microphone system

These conference-style systems are in classrooms to enable discussions during Zoom meetings or to allow audience comments to be recorded when using Panopto.

Tip: When muted, this microphone has a series of red lights around the top. Tap the mute/unmute button on the conference mic to unmute. When unmuted, it will have a green light on top.

  • Participants can be as many as 10-20 feet away from the system and still be heard clearly. Softer spoken individuals should be closer to the system. Louder individuals may be picked up as far away as 20 feet.
  • These systems do not amplify sound into the classroom.